Vector Electrolysis Hair Removal System

If you have embarrassing unwanted hair, you can now get rid of it permanently in the privacy of your own home. The Vector Hair Removal System is the only medical grade electrolysis device available to the consumer.Vector electrolysis is an FDA registered product touted by the manufacturer, Divine Skin Solutions Inc., as an effective and painless do-it-yourself, home electrolysis machine. Unlike traditional electrolysis treatments, the Vector system does not require use of a needle and may be personally administered. The idea is to end hair growth by destroying the hair follicle, to do so the Vector machine delivers an electric current to the follicle thus destroying it.

Spare accessories now available: Electrode Gel and Electrode Patches

• The Vector System uses the process of electrolysis to permanently remove hair, unlike other battery operated radio frequency devices (such as Igia) sold on infomercials.

• Offers the same results as professional electrolysis, but without the use of a needle.

• Very easy to use, simply grasp the hair with the tweezers and after a few seconds a chemical reaction occurs in the hair shaft and causes the hair follicle to dissolve and loose it ability to grow hair. The hair that was treated is permanently removed.

• A meter on the front panel shows exactly how much power is being applied during treatment.

How it Works:

1. An electrode patch is placed anywhere on the body (this patch is used instead of the metal rod used during conventional electrolysis for better comfort during treatment). This patch is then connected to the ground wire and plugged into the Vector. The second wire is plugged into the tweezers.

2. The supplied conductivity gel is coated over the hair (the conductivity gel allows hair above the surface of the skin to conduct electricity, without the conductivity gel the hair has a very high resistance and will not conduct electricity even at lethal voltages) and that hair is then grasped with the tweezers as close as possible to the skin without actually touching the skin.

3. The current will flow from the tweezers down into the hair follicle, causing the watery environment inside the hair follicle to react with salt, resulting in Sodium Hydroxide. If you were to put just a drop of sodium hydroxide on your skin it will burn a hole right through. This chemical process is what dissolves the hair follicle and therefore the hair will never grow again.

You can very quickly treat various types of facial hair, although large areas such as the legs and chest will take a long time since hair is being treated one at a time. The Vector System is the best investment you can make for the following reasons:

1. You pay for the machine just once, but get to keep it for a lifetime and perform unlimited treatments.

2. Get the same results as professional electrolysis but in the privacy of your own home, and without paying up to £100 per hour for electrolysis sessions.

3. Unlike waxing, shaving, or tweezing each hair treated by the Vector System is permanently removed and will never grow back.

For example, how much time do you spend every month tweezing your eyebrows? Now imagine tweezing your eyebrows with the Vector System instead and then after just a few treatments never having to tweeze your eyebrows again! You will save yourself hundreds of hours of aggravation and will never have to worry about that embarrassing stubble that comes just several days after tweezing.

Men with very heavy beards can use it to treat random hairs to permanently reduce the amount of hair growth to get a cleaner look when shaving. Even the sharpest razors will not give you a very close shave if the beard is very thick and coarse. After treatments with the Vector System you will have reduced hair growth making shaving smoother and less irritating. Alternatively, some men may prefer to completely remove the entire beard.

Either way, all of us have some unwanted hair that we wouldn't mind getting rid of. Isn't it worth just a one time purchase of £100 to own the Vector System and never have to worry about unwanted hair again?

 

FAQ’s

Question:
Is the treatment painful?

ANSWER:
There will be a tingling sensation during treatment, but most people tolerate it well. There are different power settings for different levels of comfort. However, there should be some tingling sensation for successful results.

Question:
How long does it take to see results?

ANSWER:
Electrolysis permanently destroys hair. However, even after you completely clear an area in one treatment you will see some re-growth. The new growth that you see is not the same hair that you treated originally but fresh anagen hairs, which were resting at the time of the original treatment. Human hair grows in cycles and therefore not all hair is growing at once. If hair was not growing in cycles then humans would look like apes. It usually takes 3 to 4 months for all hairs to go through a complete growth cycle and all hairs will need to be electrolyzed before they stop their cycle. After each treatment you will notice about a 20% reduction in hair growth in the treatment area. This reduction is permanent and will compound until there is no more hair growth in the treatment area.

Question:
What would be considered permanent hair removal?

ANSWER:
Permanent hair removal can not be completed in a single treatment of the area. Because hair grows in cycles you will have about a 20% reduction in hair growth. As the hair goes through all its cycles there will be no more hair growth.

Question:
Is this procedure going to irritate my skin?

ANSWER:
There might be little red spots appearing around the treated area but they are only temporary, so do not be alarmed. You should consider that an indication of successful treatment since there are high levels of sodium hydroxide in the hair shaft.

Question:
What is the purpose of the patch electrodes? Does this provide a faster alternative to the tweezers?

ANSWER:
The tweezers are the main treating article and what you would use as holding the hair for the time indicated in the manual. The electrode patch is designed to act strictly as the ground wire for the device - it should be placed anywhere on your body.

Question:
If it takes a few hair cycles to achieve permanent removal how can I be certain that the procedure is working for me?

ANSWER:
If you are interested in testing the effectiveness of the Vector System, we suggest selecting a small treatment area such as eyebrows. This area has accelerated cycles and will be much easier to monitor for successful treatment then a large area such as your legs or chest.

Question:
I am a man with dark leg hair. Will the Vector work for me?

ANSWER:
Yes. Vector is far from another non-functional, battery-operated device on the market. It is a full AC powered electrolysis unit that works just as well as ones in the salon. The Vector system does work on individual hairs and therefore a large area such as your legs will take a lengthy amount of time to treat. But keep in mind that once treated, the hair will never return. Unfortunately there are no miracles in the hair removal business and anyone trying to advertise one to you is either uneducated or lying for the sale.

Question:
How long do the gel and the patches that are included with the machine last?

ANSWER:
Depending on the area of treatment, the gel will usually last a month to a month and a half of daily treatment. The patches can be reused until the adhesive is not sticking to the skin.

Question:
Can I test it first?

ANSWER:
If you are interested in testing the effectiveness of the Vector System, we suggest selecting a small treatment area such as eyebrows. This area has accelerated cycles and will be much easier to monitor for successful treatment then a large area such as your legs or chest.

WARNING:
Hair removal achieved by the Vector System is irreversible. Please plan carefully the areas that are to be removed.

IMPORTANT: THIS PRODUCT IS MADE FOR OPERATION IN THE U.K. ONLY

The user is cautioned that Skinlight Cosmetics Ltd does not assume any legal liability for any property/body damage caused by negligent use of the Vector system or failure to follow the instructions for safe operation outlined in the user manual.